Garmin Edge 1000

This page provides a quick guide of all steps recommended to test our products on Garmin Edge 1000.

These steps are by no means required. You may peruse the other pages on this site and transfer the files as you see fit to your device. However, they present one good way that we believe should work.

We welcome your feedback about alternate & better ways to improve on loading the data to the unit.

Topics addressed in this guide:

Software

Information below was created on 25 April 2015 using firmware version 2.80 and a Mac computer using OSX 10.10.4. Screens and menu options may change with different software releases.

Find Data

  1. The file you download when you purchase GPX data is a compressed ZIP file.
  2. Expand that file on your computer to retrieve all the individual GPX files contained within it. To expand the file, double-click on it or choose to Open it from the menu.
  3. Depending on the package your purchased, it will contain the GPX data in a number of GPX files that have ".gpx" extension. These may be in multiple folders when you purchase all sections for an entire route.
  4. Read and agree to the GPX Data Agreement file included.
  5. View the resources file for links to:

 

Service Points

We do not recommend using the service points on the Edge 1000 yet. We have found the following limitations:

  • The device can only store 200 waypoints at any one time, regardless of where the file is stored. In a majority of cases, that will be enough for one section only. As you travel from one section to the next, you will need to remove old points before adding new ones.
  • Deleting and replacing points is very difficult. We have found only 1 way to do this:
    • Manually deleting points one at a time on the device

Consider viewing service points using your mobile device. It offers larger screen, quick browsing, higher capacity for all points along a route, and more details about each point.

If you still want to use the service points on your Edge device accounting for the limitations, see the FAQ on this subject for more information.

Tracks

Load Tracks

  1. Identify track files from their names.
  2. Select the files you need for your trip, depending on the sections and direction you want to travel. You can also select all the files and decide later while on the road about the ones you want to use.
  3. Copy track files to your device’s memory. Remember not to copy files for services yet—we discuss these further in a separate section on this page.
    1. Connect the device to your computer with USB cable.
    2. A storage folder should appear. Two will appear if you have a micro SD card in the device.
    3. Select the storage folder for your device. This is likely called GARMIN.
    4. Locate a Garmin folder.
    5. Locate a NewFiles folder.
    6. Copy the files from step 2 above into NewFiles folder.
  4. In this example, we copy the the tracks traveling west for sections 2 and 3.

Verify Tracks

  1. Disconnect device from your computer.
  2. Turn device on.
  3. Select Courses.
  4. Select a course from the list.
  5. Select Map to view the track.
  6. In this example, the screen appears black due to large scale. Zoom in to display more details from map.
  7. The course outline appears in teal color. All of our tracks are under 10,000 points – a common GPS limitation.  However, if you do not see the whole course, check your device’s track point limits.

Navigate Tracks

  1. Display home screen on the device. Select Where To?
  2. Select Saved.
  3. Select Courses.
  4. Select a course to navigate.
  5. In this example, the screen appears black due to large scale. Zoom in to display more details from map.
  6. I The course outline appears clearly in teal color. Select Ride.
  7. The device displays a prompt for navigating to the beginning of the track.
  8. Select the X mark to cancel. Use your own way to find the beginning of the track. This is also the option to use while you are already on the trip.
  9. You are now ready to navigate

Important Settings

For the most accurate track navigation, we recommend the following settings:

Turn Prompts: Off

Many users like the GPS device to give turn prompts. This is reliable most of the time, but not all of the time, depending on how the device map matches the one used to generate the track. Since they are unlikely to be identical, turn prompts may occasionally give incorrect information or attempt to calculate different routes.

You should always follow the dark purple line with black outline on the screen. The device may calculate its own route with a light purple line. Ignore that, unless you believe road conditions changed and you had a chance to verify this new calculated route.

 

If you find those special cases annoying or frustrating when the turn prompts are not accurate, then turn them off completely. Instead, navigate with your location marker along the track line on the screen.

Here is how:

  1. Display home screen on the device. Select Courses.
  2. Choose the menu icon (three horizontal lines) from the bottom right corner of the screen.
  3. Switch off Turn Guidance

Off-Course Warning: On

To have your device notify you when you get off track, turn Off Course Warnings on.  Follow the same steps above for Turn Prompts: Off. In step 3, on the same screen, switch on Off Course Warnings.

Recalculation: Off

At times when the device believes you are off-course, it will attempt to recalculate the entire course for you, giving you a new one that will not match the original. Therefore, it is best to turn recalculation. When you get off course, use your location on the screen to navigate back.

  1. Display home screen on the device.
  2. Select Settings (middle buttom symbol of wrench and screwdriver).
  3. Select Activity Profiles
  4. Select the profile you will use (Tour in this example)
  5. Select Navigation
  6. Select Routing
  7. Select Recalculation
  8. Select Off