Lewis & Clark Trail
Follow Lewis and Clark's Corps of Discovery from the Mississippi to the Pacific, tracing the Missouri and Columbia Rivers across 11 states.
- Distance
- 3,254 miles
- Surface
- 90% paved
- 2+ months
- Route Type
- Point to Point
Ride the Lewis & Clark Trail
This route runs west from Hartford, Illinois, just outside St. Louis, to Seaside, Oregon. Most riders travel westbound, as the expedition did, though it works in either direction.
What to Expect
This route was built to follow the Corps of Discovery’s water route as closely as a bicycle can, so expect long river-corridor riding through corn and wheat fields, big-sky prairie, deep river gorges, and finally the misty forests of the Pacific Northwest. Conditions vary from rural back roads to urban bike paths, and occasional rough or gravel stretches, long distances between services, and nine mountain passes make this one of the network’s more physically demanding rides.
Riders follow the Katy Trail along the Missouri River, pass Fort Mandan, where the Corps wintered in 1804–05, and ride through the Upper Missouri River Breaks National Monument, with regular chances to spot bison, elk, deer, and pronghorn. In Missoula, riders can stop at Adventure Cycling’s headquarters before crossing Lolo Pass and following the Lochsa River, one of the most faithful stretches to the expedition’s actual path. The trip ends on the Oregon coast, near where the Corps of Discovery reached the Pacific in 1805.
The route runs flat to rolling through the Missouri River plains before climbing over nine mountain passes in Montana and Idaho, including Lolo Pass. It flattens again along the Snake and Columbia River corridors, where dry canyons give way to the forested Columbia River Gorge and the wet coastal range near the Pacific. The full route includes detailed riding conditions and field notes for every climb and descent.
Sparse services and narrow to nonexistent shoulders in places make sections of this route more challenging than most in the network, and services thin out considerably through the high prairie and mountain sections, especially across eastern Montana. Cell coverage can be spotty in the plains and mountains, so download your Ride with GPS route for offline use.
Ride this route from May through September for the most reliable conditions. Expect wide temperature swings, from hot, dry prairie days to cool nights in the mountains and wet weather near the Pacific. Summer thunderstorms are common on the plains, wildfire season can affect Montana and Idaho in late summer, and the Columbia River Gorge is known for fierce, predominantly westerly winds, which work against westbound riders.
Route Sections
Hartford, IL to Council Bluffs, IA, 554.5 miles
From Hartford, near the Corps of Discovery’s 1803-04 winter encampment, the route follows the Missouri River corridor west. In Missouri, 151 miles run on the crushed limestone Katy Trail, with a hillier, paved Jefferson City Option available for riders who prefer to skip it. The route also picks up the Steamboat Trace, another crushed limestone trail, in Nebraska, and bypasses the traffic of metropolitan Kansas City before finishing at the bike-friendly Iowa West Trailhead in Council Bluffs.
Council Bluffs, IA to Pierre, SD, 488.5 miles
This section continues along the Missouri River corridor through South Dakota’s plains toward the state capital of Pierre, following the river’s reservoirs and prairie towns.
Pierre, SD to Dickinson, ND, 409.5 miles
The route heads north along the Missouri River past the Oahe Dam on Lake Oahe, a popular recreation area, then continues into Bismarck, North Dakota, a friendly city with a strong network of riverside bike paths. Near Washburn, the route passes Fort Mandan, where the Corps spent the winter of 1804-05, before following the I-94 corridor toward Dickinson. This routing was adjusted in 2012 to avoid the area around Williston due to heavy oil and gas truck traffic on roads with minimal shoulders.
Dickinson, ND to Great Falls, MT, 499 miles
This section continues along the I-94 corridor, alternating between the freeway and parallel county roads, before turning to stay south of the Missouri River in eastern Montana near the Charles M. Russell National Wildlife Refuge and Upper Missouri River Breaks National Monument. Services are few and far between through this stretch, so plan days accordingly. Terrain stays rolling to hilly, with the Rockies’ Front Range visible on the horizon by Great Falls.
Great Falls, MT to Missoula, MT, 469.8 miles
The route continues toward Missoula, home to Adventure Cycling’s headquarters and several bike shops, passing near Traveler’s Rest, the site where the expedition split into two parties for the return trip east.
Missoula, MT to Clarkston, WA, 241.3 miles
Traffic increases as the route follows secondary roads and a separated path along U.S. Highway 93 before heading southwest on U.S. Highway 12 from Lolo to Powell, Idaho, closely tracing the expedition’s actual route. The main route follows the Lochsa and Clearwater Rivers, staying fairly level after crossing Lolo Pass, with the 145.3-mile Lolo Trail approximating the Corps’ path through the Bitterroot Mountains.
Alternates:
- Blackfoot Option, an eastbound alternate retracing Captain Lewis’s 1806 route between Missoula and Great Falls, including the 13-mile Alice Creek Spur up to Lewis and Clark Pass.
Clarkston, WA to Seaside, OR, 484.4 miles
This final section heads overland to the Pacific, meeting the Columbia River in the Columbia River Gorge, where winds blow fiercely from the west. Riders can follow the Gorge on either the Oregon or Washington side. The route finishes in Seaside, Oregon, where a monument marks the Corps of Discovery’s westernmost point.
Alternates:
- Cape Disappointment Spur, about 20 mi, crosses the Columbia from the Astoria area into Washington to Cape Disappointment State Park.
Three Forks, MT to Glendive, MT, 420.7 miles
This optional section retraces Clark’s 1806 return route along the Yellowstone River in Montana, following the eastbound leg of the expedition after it split at Traveler’s Rest near Lolo.
Lewis & Clark Trail Photos
Plan Your Ride
Rough roads, long gaps between services, and more than 3,000 miles of history make a wide-tired bike and a solid resupply plan the keys to this ride.
Trip Planning & Logistics
Hartford, Illinois, sits just outside St. Louis, a major hub with an international airport and Amtrak service. Most riders travel westbound from Hartford to Seaside, following the expedition’s outbound route, and plan six to 10 weeks for the full ride. At the finish, Portland is the nearest major airport, and regional bus service connects the Oregon coast to the city. This route is available in paper and digital formats through Adventure Cycling’s shop and includes routing, detailed service information, riding conditions, and field notes for trip planning.
A wide-tired touring bike is recommended given the occasional rough roads, narrow shoulders, and crushed-limestone rail trails. Low gearing helps on the mountain passes, and a water filter is essential, since many campgrounds are primitive and lack potable water. Pack for everything from prairie heat to cold, wet coastal weather.
Many campgrounds along this route are primitive, without potable water, so plan overnight stops with that in mind. Missouri’s no-turn-away policy guarantees cyclists a site at participating state parks, and lodging grows more frequent near the larger towns along the Missouri and Columbia River corridors. Some campgrounds charge solo cyclists the same as a full tent or RV site, though hiker/biker rates are sometimes available, and Warmshowers hosts are an option in the larger cities.
Services thin out considerably through the high prairie and mountain sections, so plan resupply carefully between larger towns and carry extra water across eastern Montana. Check your digital route in Ride with GPS for service phone numbers, and call ahead for anything outside peak season.
Narrow to nonexistent shoulders occur in places, so wear bright clothing and ride defensively, especially on stretches that follow or run alongside I-94. Give bison, elk, and other large animals plenty of room near the parks, and store food properly in Montana and Idaho, where bears are present. Check wildfire conditions in late summer. Use caution on long bridge crossings near the coast, where shoulders are narrow and winds are strong.
Always check Adventure Cycling Route Updates and Corrections before you go.
Routes change. Bridges wash out, businesses close, and construction pops up overnight. We strive to keep routes updated as those things happen. When we learn about a change, we reroute around sections that have become dangerous or are temporarily closed for road work, bridge outages, or construction, and we update service information as businesses open, close, or move. Digital routes are updated as soon as we’ve reviewed a reported issue.
You’re often the first to spot these changes out on the road. Help us keep this route accurate for the next rider by reporting anything you notice with our Route Feedback Form.
This Route Is Part of Something Bigger
It’s one piece of the Adventure Cycling Route Network, began in 1976 and built on a simple mission: to empower people to travel by bike. Our team maps and maintains it; our members and donors make it possible.
-
Explore the Adventure Cycling Route Network
Our premium routes are well researched by our cartographers and well traveled by thousands of cyclists.
Adventure Cycling Route Network -
Support Route Development
Our members are the reason we can offer three route networks tailored for specific experiences and riders.
Become a Member -
Stay Connected
Find your stoke with our newsletter all about routes, gear, stories, and cycling news in your inbox twice a month.
Sign up for Bike Bits
Frequently Asked Questions
It’s our flagship, staff-built route network. The one that started it all 50 years ago with the TransAmerica Trail, the route that launched bicycle touring and bikepacking in America. Every route in it is designed and researched by our own team of cyclists and cartographers: months of research and on-the-ground testing go into each one, so what you get is more than a line on a map. Each Adventure Cycling route has detailed logistics, terrain and elevation info, points of interest, camping and lodging, safety alerts, and history, all in one place. It’s the most in-depth of our three networks, available as digital routes and most as paper maps too. It’s the route network we update most regularly as conditions change.
They’re related, but not the same thing. The Adventure Cycling Route Network is made up of routes we’ve researched, ridden, and mapped ourselves, chosen specifically for a great touring or bikepacking experience. The U.S. Bicycle Route System (USBRS) is a state-by-state national system that we serve as technical experts for, made official through each state’s department of transportation. The two overlap in a lot of places, but an ACRN route carries our own on-the-ground vetting; a USBRS route carries official state recognition.
It depends! If you want a route we’ve personally scouted end to end, with services, camping, and terrain notes built in, start with the Route Network. The ACA Route Network has routes of many different lengths and can be a much easier starting place for someone new to bicycle travel. If you’re an experienced cyclist piecing together an officially designated corridor, or riding somewhere the two systems converge, the interactive USBRS map is a good resource to use.
The Adventure Cycling Route Network is a premium network because of everything that goes into it. Unlike the U.S. Bicycle Route System (built by state DOTs) or Short Routes (submittedby cyclists in their own communities), every Adventure Cycling route is researched, ridden, and vetted end-to-end by our own team. Unlike other routes, Adventure Cycling routes come with extensive information on riding conditions, terrain notes, camping and lodging info, logistics, safety alerts, and points of interest. We also keep it current as roads and services change. The price supports that ongoing research and maintenance work, done by a nonprofit whose whole mission is making sure the route in your hands is one you can trust.
Turn-by-turn directions with a bike icon aren’t the same as a route built for specifically touring or bikepacking. Every mile in the Adventure Cycling Route Network has been researched and ridden by our staff and researchers, chosen to avoid dangerous traffic, and mapped with what a touring cyclist actually needs — food, water, camping, hotels, bike shops — spaced out along the way. The Adventure Cycling Route Network was built for cyclists by cyclists, is regularly updated, and comes with the resources and information needed to plan your ride.
No. The network includes routes for a wide range of experience and difficulty levels, from a first multi-day trip to a cross-country expedition. What every route has in common is that it was chosen with a touring cyclist’s needs in mind, whatever kind of trip you’re planning.
Not at all. Alongside iconic long-distance routes like the TransAmerica Trail, the network includes shorter regional routes, so it works for a weeklong vacation or a two-month journey.
For many years, we focused on paved routes, but today the network includes plenty of unpaved gravel riding for bikepacking. In fact, Adventure Cycling mapped the Great Divide Mountain Bike Route in 1998, arguably the most impactful bikepacking route in the world. The Adventure Cycling Route Network also includes the Golden Gravel Trail, Idaho Hot Springs Mountain Bike Route, Arkansas High Country Route, and more. Some routes are a 50/50 mix of pavement and gravel. Some routes follow paved and unpaved bike paths and rail trails. The Adventure Cycling Route Network has terrain for every cyclist.
We revisit our printed maps every three to five years, and push corrections to our digital route data as we learn about changes on the ground. If you have an Adventure Cycling Route in Ride with GPS that we’ve updated, you’ll get a notification when you open the route to update to the newest version of the route. Updating will ensure you have the latest data, information, and points of interest vital to being on route. For cyclists who have Adventure Cycling paper maps, we keep a list of route- and section-specific updates current on our Map Updates and Corrections page.
Change comes from two directions: our own staff research and reports from the cyclists actually out there riding them. If a bridge washes out, a shoulder disappears, a campground closes for repairs, or a town loses its only grocery store, that’s the kind of thing that triggers an update. You can help us keep our routes accurate; fill out our Route Feedback Form.
Most of our Adventure Cycling Routes come as waterproof print maps and digital Ride with GPS navigational data. Our print maps are the #1 longstanding popular resource for traveling cyclists. They are waterproof, highly detailed and always work. For long trips, many cyclists use a combination of print maps and digital routes.
If you’re already comfortable and familiar with a GPS navigational aid such as Ride with GPS or a Garmin, our digital data packages are an excellent choice. We do not recommend GPX data for beginners since there are a few extra steps to installing and troubleshooting.
Once you purchase a digital route, you’ll get an email with a link to unlock it in the free Ride with GPS app — no separate subscription required for basic navigation. From there you get turn-by-turn voice directions, curated points of interest like campgrounds and bike shops, and field notes on the history, geography, and climate along your route, all available 100% offline. If you’drather use a dedicated GPS device, you can export the route as a GPX file to load onto a Garmin, Wahoo, or similar device.
To export GPX files of your Adventure Cycling digital route, use your laptop or desktop to open the email you received after purchasing your digital route. Click on the link that allows you to access your Digital Route. Finally, click on EXPORT ALL at the bottom of the screen. This is the only way to export files that include the route line, points of interest, and services. Files will be exported as one ZIP file.
Adventure Cycling uses abbreviations across its paper and digital routes to indicate particular services, land or road types, route names, direction of travel, and route type. Please see our key to abbreviations.
If you have questions on how to purchase a digital route or about the route content, please contact Adventure Cycling: cartography@adventurecycling.org or 406-721-1776.
If you have questions on how to use your Digital Route in Ride with GPS, please check the Ride with GPS support page or email them at info@ridewithgps.com.
If you’re new to Ride with GPS, please check out the following resources:
Our print map panels aren’t always oriented northwards for space and layout reasons. Refer to the north arrows to help orient yourself if you’re not sure.
No. The Routes and Mapping Department does not do custom routes for individuals. Check out the routes we’ve already mapped, and use the interactive map to piece our route networks together, forming a route that gets you from a point A to point B of your choice.
It started with a single route. In 1976, we mapped the TransAmerica Trail, and more than 4,000 cyclists crossed the country together for Bikecentennial — the nation’s bicentennial cycling celebration our founders organized. That one route became the seed of a network we’ve spent the decades since expanding. Today it’s more than 58,000 miles of mapped routes across the U.S. and Canada, from classic epics like the TransAmerica Trail, Great Divide Mountain Bike Route, and Pacific Coast, to shorter regional routes.