U.S. Bicycle Route 10

From the San Juan Islands ferry dock over the North Cascades to Idaho's lake country, plus a separate ride along Lake Michigan's northern shore.

Distance
669 miles
Surface
100% paved

Ride the U.S. Bicycle Route 10

U.S. Bicycle Route 10 has two designated sections so far: a continuous route from Anacortes, Washington, to the Montana border, and a separate section in Michigan’s Upper Peninsula.

What to Expect

Washington provides the route’s longest and most mountainous section, climbing from the saltwater of Puget Sound over the glaciated North Cascades and through the dry, open valleys and Old West towns of the state’s northern tier. Idaho carries the route through a short, lake-filled stretch of the Panhandle, and Michigan offers a gentler, separate Great Lakes experience along the Lake Michigan shore. The western section brings serious climbing and long stretches between towns, while the Michigan section is gently rolling and easy to navigate, with services every 20 to 30 miles.

In Washington, the route starts at the ferry terminal in Anacortes and climbs through the North Cascades, then passes the Western-themed town of Winthrop, the Okanogan Valley, and a string of mountain passes on the way to Idaho. The Idaho Panhandle brings views of the Pend Oreille River and Lake Pend Oreille and the lakeside town of Sandpoint. In Michigan, riders take in views of the Mackinac Bridge, Lake Michigan’s rolling sand dunes, and quirky roadside stops like the Mystery Spot near St. Ignace.

Riders connecting the two disparate sections between Idaho and Michigan will need to plan their own route through the states in between.

SR 20 through the North Cascades closes seasonally, so check its status before setting your dates.

This route is signed in Michigan and Idaho. Be aware that signs can be damaged, stolen, or otherwise missing, so you can never rely totally on following signs.

Routes change. Bridges wash out, businesses close, and construction pops up overnight. We strive to keep routes updated as those things happen. When we learn about a change, we reroute around sections that have become dangerous, update service information as businesses open, close, or move, and reroute around temporary road and bridge closures or construction. Digital routes are updated as soon as we’ve reviewed a reported issue.

You’re often the first to spot these changes out on the road. Help us keep this route accurate for the next rider by reporting anything you notice with our Route Feedback Form.

States

Washington’s section connects the Idaho border near Newport with the ferry terminal in Anacortes. The route follows the state’s northern tier through communities including Colville, Republic, Okanogan, Winthrop, and Concrete, crossing broad river valleys and the North Cascades before reaching Puget Sound. SR 20 through the North Cascades closes seasonally, typically in winter.

Much of the alignment follows Adventure Cycling’s Northern Tier Route. U.S. Bicycle Route 10 was Washington’s first designated U.S. Bicycle Route, establishing an official east–west bicycle connection of more than 400 miles across the state.

Idaho’s section crosses the northern Panhandle from the Washington state line near Newport to the Montana border. Along the way, it connects communities including Priest River, Sandpoint, Hope, and Clark Fork, with views of the Pend Oreille River, Lake Pend Oreille, and the surrounding mountains.

The section continues the Washington route east and follows Adventure Cycling’s Northern Tier Route in many places. Designated in 2015, it became Idaho’s first route in the U.S. Bicycle Route System.

Michigan’s section begins at St. Ignace, where it connects with U.S. Bicycle Route 35, and follows the northern shore of Lake Michigan to the Wisconsin border. The gently rolling route links the eastern and central portions of the Upper Peninsula, passing state and national forest lands, parks, scenic overlooks, and small communities where travelers can generally find services every 20 to 30 miles.

Along the way, riders encounter views of the Mackinac Bridge, Lake Michigan’s rolling sand dunes, and local attractions such as the Mystery Spot. The route also partially follows Adventure Cycling’s North Lakes Route.

This Route Is Part of a Decades-Long Advocacy Effort

The U.S. Bicycle Route System (USBRS) is a national network Adventure Cycling has helped build since 2003. Shaped by public input from the communities it passes through, and supported by our members and donors, every mile is free to ride.

  • USBRS logomark

    Explore the U.S. Bicycle Route System

    Discover what makes this paved interstate system unique, find a route near you, or work with us to advocate for more routes.

    Learn more about the Network
  • A group of cyclists posing in front of mountains

    Support Route Development

    Our members are the reason we can offer three route networks tailored for specific experiences and riders.

    Become a Member
  • Bike Bits logo

    Stay Connected

    Find your stoke with our newsletter all about routes, gear, stories, and cycling news in your inbox twice a month.

    Sign up for Bike Bits

Frequently Asked Questions

Skip accordion

It’s a national network of officially numbered and signed bicycle routes, built from existing paved roads, paths, and trails chosen specifically for bike travel. Unlike a single bike lane or a state’s own bike map, U.S. Bicycle Routes are approved through the same national body that numbers interstate highways, AASHTO, which is what lets a route carry one consistent number as it crosses state lines.

AASHTO first created the U.S. Bicycle Route System in 1978, and in 1982 it designated the system’s first two routes — USBR 1, running from North Carolina into Virginia, and part of USBR 76, from Illinois through Kentucky into Virginia. Then growth stalled: for almost three decades, those two routes were the entire system. In 2003, AASHTO formed a task force — with Adventure Cycling as the technical partner — to figure out how to actually grow it, and by 2008 AASHTO had approved a national corridor plan to guide expansion state by state. Since then, the system has grown steadily every year, and Adventure Cycling has served as its technical expertand partner to DOTs across the country throughout.

Adventure Cycling isn’t the owner or approver of the U.S. Bicycle Route System. Our role is technical expert and coordinator: since 2003, we’ve been the organization that helps states, regional agencies, and advocacy groups actually get routes designated, offering free technical assistance, planning resources, and coordination across state lines. We’re also the only organization that hosts the entire system in one place, so riders can plan a U.S. Bicycle Route trip from a single map instead of stitching together dozens of separate state resources.

It’s the only bike route network in the country that’s officially sanctioned, numbered, and signed by state departments of transportation and AASHTO, the same organization responsible for the U.S. Interstate Highway System. That official status is what makes it the largest public bike route network in the world. Every mile is free to ride, and a route can carry the same number for hundreds of miles across multiple states, the way I-90 does for cars.

No. A state bike map might show every road that’s technically legal to ride; a bike lane is a single piece of infrastructure. A U.S. Bicycle Route is neither. It’s a complete, continuous corridor stitched together from existing roads, paths, and trails, evaluated end to end, given an official number, and (in some places) marked with on-the-ground signage so riders know they’re on it.

Start by finding the route on Adventure Cycling’s interactive networks map. We’re the only place that hosts the entire U.S. Bicycle Route System in one map, so instead of hunting down individual state DOT websites for every leg of your trip, you can browse, compare, and plan across all 35 states and D.C. from a single screen. From there, you can pull the route’s turn-by-turn digital data into Ride with GPS to navigate as you ride, or look for on-the-ground route signage where a state has installed it. Because on-road conditions vary by corridor, it’s worth checking a route’s specific mileage, road types, and services before you go, the same way you would for any long-distance ride.

Primarily, it’s built with confident, experienced cyclists in mind. Many corridors run on rural roads without separated bike infrastructure, so they suit someone comfortable riding alongside traffic. That said, plenty of sections use separated paths and trails that work well for beginners and families, and because routes are built to connect communities rather than just showcase scenery, the system serves commuters and everyday riders in some corridors just as much as long-distance travelers.

It depends on the corridor. Some sections are shared-use paths suitable for a casual ride; others are rural highways with minimal shoulder, better suited to an experienced touring cyclist. AASHTO doesn’t set a single difficulty standard for the whole system. Each state decides what’sappropriate for its own corridors, so it’s worth checking a specific route’s conditions before you go.

Start by contacting Adventure Cycling at usbrsinfo@adventurecycling.org. We provide free technical assistance to anyone working on a designation, whether that’s a state DOT, a regional planning agency, or a local advocacy group. In practice: a route gets drafted using existing state and local bike maps, gets vetted against the National Corridor Plan (the framework AASHTO approved in 2008), and needs written support — letters, resolutions, or memorandums of understanding — from every road jurisdiction it crosses. Only a state DOT can submit the final application to AASHTO, but the groundwork is very often done by volunteers, coalitions, and consultants working alongside that DOT.

State DOTs propose it, and AASHTO’s Special Committee on Route Numbering approves it. Adventure Cycling isn’t the decision-maker, but the technical coordinator that helps get a proposal into shape and connects the people working on it. A DOT can delegate the legwork to an outside partner, but the DOT’s chief executive has to sign the final application, and every route ultimately becomes public infrastructure once it’s designated.

Yes. This is one of the most common ways new routes get built. State DOTs frequently rely on advocacy groups, regional coalitions, and transportation consultants to draft the route, gather local agreements, and prepare the application, since DOT staff time is limited. Reach out to usbrsinfo@adventurecycling.org and we can point you to the implementation resources, sample selection criteria, and templates other groups have used successfully.

AASHTO’s Special Committee on Route Numbering meets twice a year, in spring and fall, and applications are due five to six weeks before each meeting. Routes are often designated in phases rather than all at once, and the system as a whole adds roughly 1,500 to 2,000 miles annually.Today it spans more than 24,000 miles across 35 states and Washington, D.C., with much more mapped out for the future.

Yes. A realignment — moving a route because a road closed, a better path opened up, or conditions changed — goes through the same state DOT-to-AASHTO approval process as a brand-new designation. U.S. Bicycle Routes on our website always reflect where the route actually is on the ground.