How To Make Your Own Studded Bike Tires

Feb 12, 2013

With snow and ice abounding in Missoula, it would be so nice to ride a fat bike around, to officially participate in Fat Bike February. But the finances for a rad, new bike are just not in the cards this year. (And truth be told, if I buy one bike this year, it'll probably be this one.)

So to stabilize my bike travel, I made my own studded tires! It was easier than I had imagined and I made a video to share this ever-rewarding do-it-yourself with you.

Special thanks to Josh, Evan, Winona, and Patrick for their collaboration and support.

--

ART. ADVENTURE. AWESOMENESS. wishes to bring enthusiasm to your day. This column is written by Rachel Stevens, a graphic designer at  Adventure Cycling Association.

Comments

gypsybytrade

Awesome. This is how we built studded fatbike tires in Anchorage before they became commercially available this year.

Some tires you don't mind drilling holes through?-- head over to FreeCycles! Great video.

February 12, 2013, 3:36 PM
Reply
Anonymous

Fun, informative, and full of positive vibes. Well done!

February 12, 2013, 4:32 PM
Reply
lezhiped

I've done my own 3 years ago in the same way and it's really work. It does took long time to screw all the screws but it pays of at the end. I just have small suggestion about the pattern. You don't really need screws on the center of the tire, you need them more on the sideways, so when the tire begin to slip there is something (sharp screw) to grab the ice. Also, more important tire to be studded is the front one because you have weight on the rear one. The rear does not slip that much, and if it does, it's not dangerous as the slipping of the front one. This http://lezhiped.wordpress.com/2013/01/25/%D0%B7%D0%B8%D0%BC%D1%81%D0%BA%D0%B8-%D0%B2%D0%B5%D0%BB%D0%BE%D1%81%D0%B8%D0%BF%D0%B5%D0%B4/ is my winter rig. (its in Macedonian, but you can check the pics, and Ill answer questions if someone ask).

Happy winter riding!

February 13, 2013, 5:59 AM
Reply
Rachel, Graphic Designer

Thank you, everyone!

Nick: I love FreeCycles! That's where a couple of the tire shots were taken.

Anon: Thanks! This video was powered by positive vibes and americanos.

Lezhiped: That makes so much sense about the positioning, but it never crossed my mind. Thank you! I did make sure the front tire was the burlier of the two.

Hey, I have a question for all of you that I got from another viewer. They asked why I didn't just use a cordless drill instead of a screwdriver to drill in the screws. Did I waste countless minutes by not doing this? I was taught to do it with a screwdriver. Would it hurt the tire to do it with a drill?

February 13, 2013, 4:58 PM
Reply
lezhiped

Hi Rachel, I'm glad I helped. It would hurt the tire feelings if you do it with a drill.

I'm kidding, but I think that you can't control the power of the drill as you can control the screwdriver by hand so you know when to stop screwing. The screws should be tight, but if you are pushing it too hard you can damage more the already damaged tire.

Also, nothing bond you more with your bike like little "elbow grease". So if you ask me, Ill still be doing it with the screwdriver.

Did someone mention the sound of the tire on the ice? It's just fantastic!

February 13, 2013, 6:56 PM
Reply
Rachel, Graphic Designer

I LOVE that sound!

Thanks so much for your studded tire insight and enthusiasm. I'll be sure to pass it on!

February 13, 2013, 7:46 PM
Reply
Mac, Media Specialist

Awesome!

February 13, 2013, 7:54 PM
Reply
lezhiped

Thank you for the cool video, Cheers!

February 13, 2013, 7:58 PM
Reply
Post a Comment
Leave this field empty

Required Field

Rate this